- Notes, cautions, and warnings
- Release summary
- Compatibility
- New and enhanced features
- Fixes
- Deprecated features
- Important notes
- Known issues — To be fixed in future releases
- Getting an error SWC0018 during OS installation
- WSMan query with space between attributes fails
- Attributes for CNA cards not displayed through Redfish or RACADM interface
- Rollback firmware Version is not displayed for NVDIMMs
- Get method not displaying certificates after all certificates are deleted
- iDRAC dashboard page in IE displays an expanded progress bar
- Unable to create a recurring job after same recurring job was completed
- Unable to create virtual disk through Redfish
- SCP Import Job completes with error due to HddSeq error
- iDRAC LC Log shows reset cause as ‘watchdog’
- Delayed response when iDRAC’s network settings are reconfigured
- Integrated/Embedded NIC displaying status as Unknown
- No errors when the selected component and the selected device firmware do not match
- SEL missed in the LCL during Racreset.
- PCIe SSD Backplane 2 is displayed as unknown
- Firmware update operation not scheduled through WSMan
- Access to serial interface fails.
- Delayed response when iDRAC's network settings are reconfigured
- Remote File Share (RFS) does not stay connected after downgrading iDRAC
- Boot Capture file does not have any content
- LC log created after going to Virtual media page in iDRAC GUI
- Firmware update for a replaced PSU failing
- Device description and type not displayed
- Get method on UefiTargetBootSourceOverride attribute shows null value
- Sluggishness in Virtual Console
- Blank boot capture file generated
- Unable to export factory shipped inventory
- NIC or FC device slot listed in hardware inventory even when disabled in BIOS
- Get operation not displaying model or serial number for PCIe devices
- iDRAC DUP update fails on SLES when secure boot is enabled
- Boot mode error during OS deployment
- Repetitive PR7 messages related to PSU in LC logs after a system erase operation
- After a warm reboot, LC logs display Disk Inserted
- Limitations
- Updating iDRAC firmware
- Lifecycle Controller Remote Services — client tools
- Resources and support
- Contacting Dell EMC
iDRAC9 Version 4.00.00.00 Release Notes
iDRAC and LC firmware
- 120813: Fixed an issue in IPMITool FRU list command, where Integrated PERC FRU was not getting displayed.
- 122565: Fixed an issue where the disk assignment was only reflecting after an iDRAC restart.
- 128920: Fixed an issue that was exceeding the on-screen timeout limit for Lifecycle Controller operations.
- 130475: Fixed an issue that was not allowing the firmware downgrade of storage controllers.
- 150842: Fixed an issue where some broadcast/ multicast packets caused iDRAC watchdog reboots.
- 148370: Fixed an issue that was leading to iDRAC Initialization failures on cold boot.
- 113901: Fixed an issue that was not detecting the storage devices in iDRAC.
- 120296: Fixed an issue that was allowing access to iDRAC Direct Port even after the port is turned off.
- 119161: Fixed an issue that was displaying different error messages in the SEL logs and LC logs.
- 118156: Fixed an issue that was displaying Persistent Memory after removing Apache Pass DIMM (AEP) after Resetting iDRAC and restarting the system simultaneously.
- 120534: Fixed an issue that was causing failure while setting Powercap values in Lockdown mode.
- 120820: Fixed an issue that was preventing iDRAC from detecting virtual disks in eHBA Mode during Warm Reboot job.
- 116586: Fixed an issue that was displaying unsupported RAID level while creating a virtual disk with controller in eHBA mode.
- 122290: Fixed an issue that was not reporting drive events when the drive sensors are disabled.
- 127197: Fixed an issue that was updating CPLD three times.
- 111379: Fixed an issue that was causing the vFlash initialization failure after iDRAC firmware was downgraded.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\