- Notes, cautions, and warnings
- Release summary
- Compatibility
- New and enhanced features
- Fixes
- Important notes
- Known issues — To be fixed in future releases
- Storage devices not found in iDRAC
- Hot-plugged PCIe SSDs not detected
- NIC or FC device slot listed in hardware inventory even when disabled in BIOS
- <Keyboard_Mouse_USB_reset_warning> button in Virtual Console with Java plug-in
- Firmware update job name in Tasks Redfish API showing as "Firmware Update"
- Foreign Preview not found & not able to clear the foreign config on storage controller in iDRAC
- GracefulRestart performs ForcefulRestart in Redfish API
- Get operation not displaying model or serial number for PCIe devices
- IP address missing in iDRAC
- Unable to set Power cap values in Lockdown mode
- Incorrect firmware version displayed after the update
- iDRAC not detecting Virtual disks in eHBA Mode
- Legacy attribute System.Embedded.1#Diagnostics.1#OSAppCollectionTime displays incorrect time
- iDRAC Direct Port accessible even after the port is turned off
- Getting an error while downloading DUP using Redfish interface
- Updates through Redfish Simple Update Transfer Protocol failing
- Getting partial screen on online video player
- Unsupported RAID level displayed
- SEL not reporting drive events
- SEL logs in the setup menu and LC logs in the iDRAC GUI not matching
- MaxReadingRange and MinReadingRange for Readingvolts attributes displayed incorrectly
- iDRAC DUP update fails on SLES when secure boot is enabled
- CPLD update repeats three times
- Boot mode error during OS deployment
- Header error while using Powershell for Redfish requests
- Port 5353 blocked by iDRAC internal firewall and appears as Open|Filtered
- Repetitive PR7 messages related to PSU in LC logs after a system erase operation
- Qlogic Fiber channel device Link Status displayed as Unknown or Unavailable
- Persistent Memory displayed after removing Apache Pass DIMM (AEP)
- iDRAC IP changes to 0.0.0.0 temporarily during power cycles
- After a warm reboot, LC logs display Disk Inserted
- Limitations
- Updating iDRAC firmware
- Lifecycle Controller Remote Services — client tools
- Resources and support
- Contacting Dell EMC
iDRAC9 with Lifecycle Controller Version 3.40.40.40 Release Notes
Legacy attribute System.Embedded.1#Diagnostics.1#OSAppCollectionTime displays incorrect time
- Description
- This attribute is not referenced for any functionality within iDRAC modules in the 14th Generation systems. You see an incorrect number, instead of an accurate OS Data Collection Time.
- Workaround
- Run the RACADM command techsupreport getupdatetime
- Systems affected
- All systems supported by this release.
- Tracking number
- 121111
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\