Case 1: selected an apply operation (apply now, at next
reboot, or at scheduled time) and there are no existing pending operations
If you have selected Apply Now, At Next Reboot, or At Scheduled Time and then clicked Apply, first the pending
operation is created for the selected storage configuration operation.
If the pending operation is successful and there
are no prior existing pending operations, then the job is created.
If the job is created successfully, a message indicating that the
job ID is created for the selected device is displayed. Click Job Queue to view the progress of the job in the Job Queue page. If the job is not created, a message
indicating that the job creation was not successful is displayed.
Also, the message ID and the recommended response action are displayed.
If the pending operation creation is unsuccessful
and there are no prior existing pending operations, an error message
with ID and recommended response action is displayed.
Case 2: selected an apply operation
(apply now, at next reboot, or at scheduled time) and there are existing
pending operations
If you have selected Apply Now, At Next Reboot, or At Scheduled Time and then clicked Apply, first the pending operation is created for the selected storage
configuration operation.
If the pending operation is created successfully and
if there are existing pending operations, then a message is displayed.
Click the View Pending Operations link to view the pending operations for the device.
Click Create Job to create
job for the selected device. If the job is created successfully, a
message indicating that the job ID is created for the selected device
is displayed. Click Job Queue to view the progress
of the job in the Job Queue page. If the job
is not created, a message indicating that the job creation was not
successful is displayed. Also, the message ID and the recommended
response action is displayed.
Click Cancel to not create
the job and remain on the page to perform more storage configuration
operations.
If the pending operation is not created successfully
and if there are existing pending operations, then an error message
is displayed.
Click Pending Operations to view the pending
operations for the device.
Click Create Job For Successful Operations to
create the job for the existing pending operations. If the job is
created successfully, a message indicating that the job ID is created
for the selected device is displayed. Click Job Queue to view
the progress of the job in the Job Queue page. If the job is
not created, a message indicating that the job creation was not successful
is displayed. Also, the message ID and the recommended response action
are displayed.
Click Cancel to not create the job and remain
on the page to perform more storage configuration operations.
Case 3: selected add to pending operations
and there are no existing pending operations
If you have selected Add to Pending Operations and then clicked Apply, first the pending
operation is created for the selected storage configuration operation.
If the pending operation is created successfully
and if there are no existing pending operations, then an information
message is displayed:
Click OK to remain on the page
to perform more storage configuration operations.
Click Pending Operations to
view the pending operations for the device. Until the job is created
on the selected controller, these pending operations are not applied.
If the pending operation is not created successfully
and if there are no existing pending operations, then an error message
is displayed.
Case 4: selected add to pending operations
and there are prior existing pending operations
If you have selected Add to Pending Operations and then clicked Apply, first the pending
operation is created for the selected storage configuration operation.
If the pending operation is created successfully and
if there are existing pending operations, then an information message
is displayed:
Click OK to remain on the
page to perform more storage configuration operations.
Click Pending Operations to
view the pending operations for the device.
If the pending operation is not created successfully
and if there are existing pending operations, then an error message
is displayed.
Click OK to remain on the
page to perform more storage configuration operations.
Click Pending Operations to
view the pending operations for the device.
NOTE
At any time, if you do not see the option to create
a job on the storage configuration pages, go to Storage Overview > Pending Operations page to view the existing pending operations and to
create the job on the required controller.
Only cases 1 and 2 are applicable for PCIe SSD. You
cannot view the pending operations for PCIe SSDs and hence Add to Pending Operations option is not available. Use
racadm command to clear the pending operations for PCIe SSDs.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\