- Notes, cautions, and warnings
- Release summary
- Compatibility
- New and enhanced features
- Fixes
- Important notes
- Known issues — To be fixed in future releases
- Storage devices not found in iDRAC
- Few properties are not listing for Embedded Network Adapters through Redfish
- Hot-plugged PCIe SSDs not detected
- NIC or FC device slot listed in hardware inventory even when disabled in BIOS
- <Keyboard_Mouse_USB_reset_warning> button in Virtual Console with Java plug-in
- Firmware update job name in Tasks Redfish API showing as "Firmware Update"
- Foreign Preview not found & not able to clear the foreign config on storage controller in iDRAC
- GracefulRestart performs ForcefulRestart in Redfish API
- Get operation not displaying model or serial number for PCIe devices
- IP address missing in iDRAC
- Unable to set Power cap values in Lockdown mode
- Incorrect firmware version displayed after the update
- iDRAC not detecting Virtual disks in eHBA Mode
- Legacy attribute System.Embedded.1#Diagnostics.1#OSAppCollectionTime displays incorrect time
- iDRAC Direct Port accessible even after the port is turned off
- Getting an error while downloading DUP using Redfish interface
- Getting partial screen on online video player
- Unsupported RAID level displayed
- SEL logs in the setup menu and LC logs in the iDRAC GUI not matching
- MaxReadingRange and MinReadingRange for Readingvolts attributes displayed incorrectly
- iDRAC DUP update fails on SLES when secure boot is enabled
- Persistent memory option is shown in iDARC GUI even after removing AEP DIMM's
- Boot mode error during OS deployment
- iDRAC not always applying Persistence Policy after DC Power Cycle (cold boot)
- Virtual Disk not created after importing config.xml
- OS Driver Version for FCoE device displayed as Unavailable
- iDRAC Single Sign-On (SSO) authentication fails from OME-M GUI
- System going into Suspend mode during firmware update
- AEP not enabling for a 4 socket system
- Header error while using Powershell for Redfish requests
- Port 5353 blocked by iDRAC internal firewall and appears as Open|Filtered
- Limitations
- Updating iDRAC firmware
- Lifecycle Controller Remote Services — client tools
- Resources and support
- Contacting Dell EMC
iDRAC9 with Lifecycle Controller Version 3.36.36.36 Release Notes
iDRAC and LC firmware
- 141576: Fixed an issue that was not allowing sleds to power-on in a large scale MX platform chassis.
- 136778: Fixed an issue in certain configurations of PowerEdge M640 that was causing chassis fans to run continuously at 100%.
- 135377: Fixed an issue that was not allowing alerts for powerenablelog feature in Syslog.
- 141512: Fixed an issue that was causing the system fans to run at 100% in certain configurations of PowerEdge 740xd with HBA 330.
- 137719: Fixed an issue in PowerEdge C4140, that was not allowing system ID front panel blink feature.
- 145919: Fixed an issue in PowerEdge R7425 configuration with V100 GPGPU, that was causing CPU utilization drop.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\