- Notes, cautions, and warnings
- Release summary
- Compatibility
- New and enhanced features
- Fixes
- Important notes
- Known issues — To be fixed in future releases
- Storage devices not found in iDRAC
- Few properties are not listing for Embedded Network Adapters through Redfish
- Hot-plugged PCIe SSDs not detected
- NIC or FC device slot listed in hardware inventory even when disabled in BIOS
- <Keyboard_Mouse_USB_reset_warning> button in Virtual Console with Java plug-in
- Firmware update job name in Tasks Redfish API showing as "Firmware Update"
- Foreign Preview not found & not able to clear the foreign config on storage controller in iDRAC
- GracefulRestart performs ForcefulRestart in Redfish API
- Get operation not displaying model or serial number for PCIe devices
- IP address missing in iDRAC
- Unable to set Power cap values in Lockdown mode
- Incorrect firmware version displayed after the update
- iDRAC not detecting Virtual disks in eHBA Mode
- Legacy attribute System.Embedded.1#Diagnostics.1#OSAppCollectionTime displays incorrect time
- iDRAC Direct Port accessible even after the port is turned off
- Getting an error while downloading DUP using Redfish interface
- Getting partial screen on online video player
- Unsupported RAID level displayed
- SEL logs in the setup menu and LC logs in the iDRAC GUI not matching
- MaxReadingRange and MinReadingRange for Readingvolts attributes displayed incorrectly
- iDRAC DUP update fails on SLES when secure boot is enabled
- Persistent memory option is shown in iDARC GUI even after removing AEP DIMM's
- Boot mode error during OS deployment
- iDRAC not always applying Persistence Policy after DC Power Cycle (cold boot)
- Virtual Disk not created after importing config.xml
- OS Driver Version for FCoE device displayed as Unavailable
- iDRAC Single Sign-On (SSO) authentication fails from OME-M GUI
- System going into Suspend mode during firmware update
- AEP not enabling for a 4 socket system
- Header error while using Powershell for Redfish requests
- Port 5353 blocked by iDRAC internal firewall and appears as Open|Filtered
- Limitations
- Updating iDRAC firmware
- Lifecycle Controller Remote Services — client tools
- Resources and support
- Contacting Dell EMC
iDRAC9 with Lifecycle Controller Version 3.36.36.36 Release Notes
Persistent memory option is shown in iDARC GUI even after removing AEP DIMM's
- Description
- Occasionally iDRAC GUI shows the Persistent Memory Option even after removing the AEP DIMM's. This happens during the case when iDRAC and HOST are simultaneously rebooted. Due to timing issues, iDRAC GUI uses stale data from the Redfish back-end calls.
- Workaround
-
- User can use other interfaces like WSMAN or RACADM to see the accurate Bios Settings.
- Once User gets this issue , The User needs to reboot the iDRAC after the BIOS POST Done.
- Systems affected
- All systems supported by this release.
- Tracking number
- 118156
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\