Integrated Dell Remote Access Controller 8 (iDRAC8) and iDRAC7 Version 2.10.10.10 RACADM Command Line Interface Reference Guide

Verifies if the destination IPv6 address is reachable from iDRAC or with the current routing-table contents. A destination IPv6 address is required. Based on the current routing-table contents, an ICMP echo packet is sent to the destination IPv6 address.

Verifies if the destination IPv6 address is reachable from CMC or with the current routing-table contents. A destination IPv6 address is required. Based on the current routing-table contents, an ICMP echo packet is sent to the destination IPv6 address.

To run this subcommand, you must have the Administrator privilege.

To run this subcommand, you must have Debug privilege.

racadm ping6 <ipv6address>

Pinging 2011:de11:bdc:194::31 from 2011:de11:bdc:194::101 with 32 bytes of data:
                                                Reply from 2011:de11:bdc:194::31: time<1ms 
                                                Reply from 2011:de11:bdc:194::31: time<1ms 
                                                Reply from 2011:de11:bdc:194::31: time<1ms 
                                                Reply from 2011:de11:bdc:194::31: time<1ms 
                                                
                                                Ping statistics for 2011:de11:bdc:194::31:
                                                Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
                                                Approximate round trip times in milli-seconds:
                                                Minimum = 0ms, Maximum = 0ms, Average = 0ms