Integrated Dell Remote Access Controller 8 (iDRAC8) and iDRAC7 Version 2.10.10.10 RACADM Command Line Interface Reference Guide

What’s New in This Release

Support for using a common iDRAC firmware across Dell’s 12th and 13th generation PowerEdge servers. You can apply the same (2.10.10.10) version on a 13th generation PowerEdge server with iDRAC8 and a 12th generation PowerEdge server with iDRAC7.

Enables direct upgrade to version 2.10.10.10 from 2.xx.xx.xx, 1.5x.5x.5x, or 1.6x.6x.

Supports features such as SNMPv3 traps, combined functionality of Tech Support Report with iDRAC Service Module, security enhancements, and code stability on the Dell 12th generation PowerEdge servers.
Support to manage PowerEdge FX2/FX2s systems using the RACADM Proxy command.
Support to control the chassis related events.
Support for patrol read in unconfigured areas using the Storage.Controller.PatrolReadUnconfiguredArea attribute.
Support to modify the controller mode to RAID or HBA using the Storage.Controller.RequestedControllerMode attribute.
Support to indicate the web server encryption state using the iDRAC.WebServer.SSLEncryptionBitLength attribute.
Support to indicate the VNC server encryption state using the iDRAC.VNCServer.SSLEncryptionBitLength attribute.
Support for Enhanced System DBPM (DAPC) mode using the BIOS.SysProfileSettings.PowerSaver attribute.