iDRAC 8/7 v2.50.50.50 RACADM CLI Guide

PDF

remoteimage


Description	Connects, disconnects, or deploys a media file on a remote server. To run this subcommand, you must log in with virtual media privilege for iDRAC.
Synopsis	racadm remoteimage [-m <module> \| -a] racadm remoteimage -d [-m <module> \| -a] racadm remoteimage -s [-m <module> \| -a] racadm remoteimage -c [-m <module> \| -a] [-u <username> -p <password> -l <image_path>] racadm remoteimage -e [-m <module> \| -a] [-u <username> -p <password> -l <image_path>]
Input	-c — Connect the image. -d — Disconnect image. -l — Image location on the network share; use single quotation marks around the location. -s — Display current status. NOTE: Use a forward slash (/) when providing the image location. If backward slash (\) is used, override the backward slash for the command to run successfully. For example: racadm remoteimage -c -u user -p xxx -l /\/\192.168.0.2/\CommonShare/\diskette NOTE: The following options only apply to connect and deploy actions -u — Username. User name to access the network share. For domain users, you can use the following formats: domain/user domain\user user@domain -p — Password to access the network share.
Example	Configure a Remote image. racadm remoteimage -c -u "user" -p "xxx" -l //shrloc/foo.iso Remote Image is now Configured Disable Remote File Sharing. racadm remoteimage -d Disable Remote File Started. Please check status using -s option to know Remote File Share is ENABLED or DISABLED. Check Remote File Share status. racadm remoteimage -s Remote File Share is Enabled UserName Password ShareName //192.168.0/xxxx/dtk_3.3_73_Linux.iso Deploy a remote image on iDRAC CIFS Share. racadm remoteimage -c -u admin -p xxx -l //192.168.0/dev/floppy.img Deploy a remote image on iDRAC NFS Share. racadm remoteimage -c -u admin -p xxx -l '//192.168.0/dev/floppy.img'