Dell PowerProtect DD Management Center (DDMC) 7.9 Installation and Administration Guide

PDF

Checking SNMP status and configuration

The SNMP page shows SNMP status and properties, and the SNMP V3 and SNMP V2C configuration.

Click the Settings button (the gear icon) in the DDMC banner, then select Network > SNMP.
View information about SNMP, as described in the following tables.

Table 1. SNMP status
Item	Description
Status	Operational status of the SNMP agent on DDMC: Enabled or Disabled.

Table 2. SNMP properties
Item	Description
SNMP System Location	Location of DDMC.
SNMP System Contact	Administrator for DDMC.

Table 3. SNMP V3 configuration
Item	Description
SNMP Users
Name	Name of the user on the SNMP manager with access to the agent for DDMC.
Access	Access permissions for the SNMP user: Read-only Read-write
Authentication Protocols	Authentication protocol for validating SNMP user: MD5 SHA1 None
Privacy Protocol	Encryption protocol for validating SNMP user: AES DES None
Trap Hosts
Host	IP address or domain name of the SNMP management host.
Port	Port that is used for SNMP trap communication with the host. Port 162 is the default.
User	User on trap host authenticated to access DD SNMP information.

Table 4. SNMP V2C configuration
Item	Description
Communities
Community	Name of the community, for example, public, private, or localCommunity.
Access	Access permission that is assigned: Read-only Read-write
Hosts	The hosts in this community.
Trap Hosts
Host	Systems that are designated to receive SNMP traps that are generated by DDMC. If this parameter is set, systems receive alert messages, even if the SNMP agent is disabled.
Port	Port that is used for SNMP trap communication with the host. Port 162 is the default.
Community	Name of the community, for example, public, private, or localCommunity.