Installing the I/O board - shipped with M.2 connector
About this task
The following image indicates the location of the I/O board on computers shipped with NVIDIA GeForce RTX 3050, and NVIDIA GeForce RTX 3050 Ti and provides a visual representation of the removal procedure.
![](https://dl.dell.com/content/guides/public/html//dell-g15-5511-service-manual/images/GUID-18017AFA-CF97-4507-A57D-880A2A0ECD09-low.jpg)
Steps
- Align the screw holes on the I/O board with the screw holes on the system board.
- Replace the two screws (M2x4) that secure the I/O board to the system board.
- Turn the system board over.
Next steps
For computers shipped with NVIDIA GeForce RTX 3050, and NVIDIA GeForce RTX 3050 Ti
- Install the system board.
- Install the memory module.
- Install the wireless card.
- Install the solid-state drive 2.
- Install the solid-state drive 1.
- Install the rear cover
- Install the battery.
- Install the base cover.
- Follow the procedure in After working inside your computer.