Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell G5 15 5500 Service Manual

Installing the 2280 solid-state drive in M.2 slot two

Prerequisites

If your are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the 2280 solid-state drive installed in M.2 slot two and provides a visual representation of the installation procedure.

NOTE Depending on the configuration ordered, your computer may be shipped with one of the following:
  • One hard drive and one 2230 or 2280 solid-state drive
  • One 2230 solid-state drive and one 2280 solid-state drive

Image: Installing the solid-state drive/Intel Optane memory module

Steps

  1. Align the notches on the solid-state drive with the SSD2 slot on the system board.
  2. Slide the solid-state drive into the SSD2 slot on the system board.
  3. Place the solid-state drive bracket on the solid-state drive.
  4. Align the screw holes on the solid-state drive bracket with the screw holes on the system board and the palm-rest and keyboard assembly.
  5. Replace the two screws (M2x3) that secure the solid-state drive to the system board.

Next steps

  1. Install the base cover.
  2. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\