Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC Open Networking Troubleshooting Guide March 2019

PDF

S6000–ON factory defaults restore

If you need to restore the S6000–ON factory defaults, reboot the system to ONIE Rescue mode.

If it is not possible to do this with the operating system you installed, reboot the system and from Grub and select ONIE: Rescue.

  • CAUTION: Restoring factory defaults erases any installed operating system and requires a long time to erase storage.

ONIE Rescue bypasses the installed operating system and boots the system into ONIE until you reboot the system. After ONIE Rescue completes, the system resets and boots to the ONIE console.

  1. Restore the S6000–ON factory defaults from Grub using the ONIE: Rescue command.

    Use the up and down arrow keys to select which entry is highlighted. Press Enter to select an operating software-selected OS or enter e to edit the commands before booting. Enter c for a command line. The highlighted entry (*) executes automatically in the operating system. 

    GNU GRUB  version 2.02~beta2+e4a1fe391
                                    
                                    +---------------------------------+
                                    | ONIE: Install OS                |
                                    | *ONIE: Rescue                   |
                                    | ONIE: Uninstall OS              |
                                    | ONIE: Update ONIE               |
                                    | ONIE: Embed ONIE                |
                                    | DELL EMC DIAG                   |
                                    |                                 |
                                    |                                 |
                                    |                                 |
                                    |                                 |
                                    |                                 |
                                    +---------------------------------+
  2. Press ENTER to activate the console.
  3. You can also use the onie-uninstaller command to return to the default ONIE settings. 
                                        ONIE:/ # onie-uninstaller
                                    Erasing unused NOR flash region Erasing 128 Kibyte @ 20000 - 100% complete. Erasing internal mass storage device: /dev/mmcblk0
                                    (7832MB) Percent complete: 100%

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\