- Notes, cautions, and warnings
- NVMe PCIe SSD overview
- Supported operating systems
- Troubleshooting
- NVMe PCIe SSD carrier LED indicators
- Ungraceful system shutdown or power loss
- General errors
- NVMe drive properties intermittently not available in iDRAC
- NVMe PCIe SSD is not listed in the operating system
- I/O device error on write to NVMe PCIe SSD
- NVMe PCIe SSD performance measurement not optimal
- System becomes unresponsive when NVMe PCIe U.2 2.5-inch SSD is surprise removed
- System becomes unresponsive or fails when NVMe PCIe SSD is inserted
- Related documentation
- Getting help
Dell Express Flash NVMe PCIe SSD User’s Guide
Linux
On Linux-based systems, you can configure NVMe PCIe SSDs from the partitioning tool by specifying or selecting the device name. The device name for NVMe PCIe SSDs is
/dev/nvmeXn1, where
X is the number corresponding to each NVMe PCIe SSD in the system. For example:
/dev/nvme0n1
/dev/nvme1n1
/dev/nvme2n1
Use OpenManage Server Administrator for managing and performing NVMe PCIe SSD-related tasks.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\