NOTE: In the Device list, click the device name or IP address to view device
configuration data, and then edit device configuration as described
in this section.
By clicking OpenManage Enterprise > Devices > selecting a device in
the device list > View Details, you can:
View information
about the health and power status, device IP, and Service Tag.
View general information
about the device and perform device control and troubleshooting tasks.
View device information
such as RAID, PSU, OS, NIC, memory, processor, and storage enclosure. OpenManage Enterprise provides a built-in report to get an overview about the NIC, BIOS, Physical Disk and Virtual Disk used on the devices monitored by OpenManage Enterprise. Click OpenManage Enterprise > Monitor > Reports.
Update or roll back firmware
versions of components in a device that are associated with a firmware
baseline. See Manage the device firmware.
Acknowledge, export,
delete, or ignore the alerts pertaining to a device. See Managing
device alerts.
View and manage the configuration inventory of the device for the purposes of configuration compliance. A compliance comparison is initiated when the configuration inventory is run against the devices.
On the <device name> page, under Overview, the health, power status, and Service Tag of the device is displayed. Click the IP address to open the iDRAC login page. See the iDRAC User's Guide available on the Dell support site.
Information: Device information such as Service Tag, DIMM slots, iDRAC DNS name, processors, chassis, operating system, and data center name. Multiple management IP addresses correlated to the device are listed and can be clicked to activate the respective interfaces.
Recent Alerts: The recent alerts generated for the device.
Recent Activity: A list of recent jobs run on the device. Click View All to view all the jobs. See Using jobs for device control.
Remote Console: Click Launch iDRAC to start the iDRAC application. Click Launch Virtual Console to start the virtual console. Click the Refresh Preview symbol to refresh the Overview page.
Server Subsystem: Displays health status of other components of the device such as PSU, fan, CPU, and battery.
NOTE: The Last Updated section indicates the last time when the device inventory status was updated. Click the Refresh button to update the status. An Inventory job is started and the status is updated on the page.
By using Power Control, turn on, turn off, power cycle, and gracefully shut down a device.
OpenManage Enterprise provides a built-in report to get an overview of devices monitored by OpenManage Enterprise. Click OpenManage Enterprise > Monitor > Reports > Devices Overview Report. Click Run. See Run reports.
Device hardware information
OpenManage Enterprise provides a built-in report about the components and their compliance with the firmware compliance baseline. Click OpenManage Enterprise > Monitor > Reports > Firmware Compliance per Component Report. Click Run. See Run reports.
Device Card Information—Information about cards used in the device.
Installed Software—List of firmware and software installed on different components in the device.
Processor—Processor information such as sockets, family, speed, cores, and model.
RAID Controller Information—PERC and RAID controller used on the storage devices. The rollup status is equal to the status of the RAID that has high severity. For more information about Rollup Health status, see the MANAGING THE ROLLUP HEALTH STATUS BY USING IDRAC ON THE DELL EMC 14TH GENERATION AND LATER POWEREDGE SERVERS white paper on the Dell TechCenter.
NIC Information—Information about NICs used in the device.
Memory Information—Data about DIMMs used in the device.
Array Disk: Information about the drives installed on the device. OpenManage Enterprise provides a built-in report about the HDDs or virtual drives available on the devices monitored by OpenManage Enterprise. Click OpenManage Enterprise > Monitor > Reports > Physical Disk Report. Click Run. See Run reports.
Storage Controller : Storage controller installed on the device. Click the plus symbol to view individual controller data.
Power Supply Information: Information about the PSUs installed on the device.
Operating System—OS installed on the device.
Licenses—Health status of different licenses installed on the device.
Storage Enclosure—Storage enclosure status and EMM version.
Virtual Flash—List of virtual flash drives and its technical specification.
FRU—List of Field Replaceable Units (FRUs) that can be handled and repaired only by the field technicians. OpenManage Enterprise provides a built-in report about the Field Replacable Units (FRUs) installed on the devices monitored by OpenManage Enterprise. Click OpenManage Enterprise > Monitor > Reports > FRU Report. Click Run. See Run reports.
Device Management Info—IP address information of the iDRAC installed only in case of a server device.
Guest Information—Displays the guest devices monitored by OpenManage Enterprise. UUID is the Universally Unique Identifier
of the device. The GUEST STATE column indicates the working status of the guest device.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\