Dell EMC OpenManage Enterprise Version 3.4 User's Guide

Edit a profile

An existing profile can be edited on the Configurations > Profiles page. The changes in the profile do not affect the associated target system automatically. For the changes to take effect, the modified profile must be redeployed on the target device.

1. Select Rename and in the Rename Profile wizard edit the profile name in the Name box.
2. Select Edit Profile to activate the Edit Profile wizard and edit the following:
   1. On the Details page, you can edit the Name and Description. Click Next.
   2. On the Boot to Network ISO page, select the Boot to Network ISO check box to specify the full ISO path and the share location and do the following:
      • Select Share Type as either CIFS or NFS.
      • In the ISO Path box, enter the full ISO path.
      • Provide details in the Share IP Address, Username, and Password boxes.
      • Select the Time to Attach ISO dropdown menu options to set the number of hours the network ISO file will remain mapped to the target device. By default, this value is set as four hours.
      • Click Next.
   3. On the iDRAC Management IP page, select from one of the following :
      • Don't change IP settings.
      • Set as DHCP
      • Set static IP and provide the relevant Management IP, Subnet Mask, and Gateway details.
   4. On the Target Attributes page, you can select and edit the BIOS, System, NIC, iDRAC, and virtual identity attributes of the profile.
   5. Click Finish to save the changes.