Dell OpenManage Deployment Toolkit Version 5.4 Command Line Interface Reference Guide

TpmCommand

Table 1. TpmCommandThe following table describes the valid arguments, descriptions and application systems for TpmCommand.
Valid Arguments	On systems prior to 13G: NA On 13G and later systems: None, Activate, Deactivate, Clear
Description	Configures the Trusted Platform Module (TPM). None — Commands are not sent to the TPM. Activate — TPM is enabled. Deactivate — TPM is disabled. Clear — All the contents of TPM are cleared. NOTE This field is read-only when TpmSecurityis set to Off. CAUTION Clearing TPM results in loss of all keys in the TPM. This could affect booting to operating system. Example: A:>syscfg --TpmCommand=Activate
Applicable Systems	PowerEdge 13G and later systems