Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell OpenManage Deployment Toolkit Version 5.4 Command Line Interface Reference Guide

PDF

solcfgparams

Table 1. solcfgparamsThe following table describes the option, sub-option, valid arguments and descriptions for the solcfgparams.
Option Sub-option Valid Arguments Description
solcfgparams

Configures and displays SOL configuration parameters. This option can be replicated.

--solenable enable, disable Enables or disables if the SOL payload type can be activated. This option can be replicated.
--solprivlevel user, operator, administrator Sets the minimum user privilege level required to activate the SOL. This option can be replicated.
--solcharaccuminterval 1–255 Sets the Character Accumulate Interval in 5–ms increments (1–255). This sets the typical amount of time that the BMC waits before transmitting a partial SOL character data packet. This option can be replicated.
--solcharsendthreshold 1–255

Specifies that the BMC automatically sends an SOL character data packet containing this number of characters in increments of 5 (1–255) as soon as this number of characters (or greater) has been accepted from the baseboard serial controller into the BMC. This option can be replicated.

--solbitrate 9600, 19200

Sets the serial channel communication bit rate (in bps) with the BMC when SOL is activated. This option can be replicated.

NOTE The arguments for solbitrate vary with various Dell systems. If an argument valid for a particular Dell system is entered for another system, the Parameter out of range error is displayed.
Example 1 (to display the current SOL configuration):
A:>syscfg solcfgparams
solcfgparams solenable=enable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=25
solbitrate=9600
Example 2 (to set the SOL configuration parameters):
A:>syscfg solcfgparams
--solenable=disable
--solprivlevel=administrator
--solcharaccum interval=25
--solcharsend threshold=100
--solbitrate=9600 solcfgparams solenable=disable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=100
solbitrate=9600

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\