Dell OpenManage Deployment Toolkit Version 5.4 Command Line Interface Reference Guide

SerialPortAddress / serialportaddrsel

Table 1. SerialPortAddress / serialportaddrselThe following table describes the valid arguments, description and the applicable systems used for the command SerialPortAddress / serialportaddrsel.
Valid Arguments	On systems prior to Dell’s 12th generation PowerEdge systems: default, alternate On Dell’s 12th generation PowerEdge and later systems: Serial1Com1Serial2Com2, Serial1Com2Serial2Com1, Com1, Com2
Description	Sets the port address of the serial devices. On systems prior to Dell’s 12th generation PowerEdge systems, when this option is default, Serial Device 1 is set to COM port 1 and Serial Device 2 is set to COM port 2. On systems prior to Dell’s 12th generation PowerEdge systems, when this option is alternate, Serial Device 1 is set to COM port 2 and Serial Device 2 is set to COM port 1. This option can be replicated. Example: A:>syscfg --serialportaddrsel=default serialportaddrsel=default
Applicable Systems	Dell’s 11th generation PowerEdge and later systems