Dell OpenManage Deployment Toolkit Version 5.4 Command Line Interface Reference Guide

Displays the redundancy status of internal dual SD module. The status can be:

• Full — Secure digital card (SD) 1 and 2 are functioning properly.
• Lost — Either any of the secure digital cards or both are not functioning properly.

The option also displays the status of the individual SD cards as follows:

• Active — The card is used for secure digital reads.
• Standby — The card is receiving a copy of all secure digital reads.
• Failed — An error is reported during a secure digital read or write.
• Absent — No secure digital media is detected.
• Offline — At boot, card identification signature is different from the non-volatile storage value or card is the destination of a copying operation that is in progress.
• Write Protected — The card is write-protected.

Example:

A:>syscfg --remflashmedia

Internal Dual SD ModuleRedundancy=Lost

SD1 status=Absent

SD1 status=Active