Dell OpenManage Deployment Toolkit Version 5.4 Command Line Interface Reference Guide

InSystemCharacterization

Table 1. InSystemCharacterizationThe following table describes the valid arguments of InSystemCharacterization and the systems on which it is applicable.
Valid Arguments	On systems prior to 12G: NA On 12G and later systems: FastBoot, OptimizedBoot, Disabled
Description	In-System Characterization (ISC) runs during power-on self-test (POST) on detecting relevant changes in the system configuration to optimize power and performance. ISC takes about 20 seconds to run, and a system restart is required to apply the system configuration changes. The FastBoot option runs ISC and continues without applying ISC results until the next system restart. The OptimizedBoot option runs ISC and forces an immediate system restart to apply the results. If set to Disabled, ISC does not run. Example: A:>syscfg --InSystemCharacterization=FastBoot InSystemCharacterization=FastBoot
Applicable Systems	PowerEdge 12G and later systems