Dell OpenManage Deployment Toolkit Version 5.4 Command Line Interface Reference Guide

Enumerating RAID Controllers

The following table lists the RAIDCFG options, parameters, and pre-defined arguments for enumerating RAID controllers.

Table 1. Enumerating RAID ControllersThe following table describes the RAIDCFG options, parameters, and pre-defined arguments for enumerating RAID controllers.
Mandatory Options and Arguments	Optional Parameters	Valid Parameters Arguments	Description
-ctrl or controller	NA	NA	Lists all the RAID controllers on the host system, along with select property information. This option is mandatory Example: raidcfg -ctrl Controller_ID/Slot_ID: 4 Controller_PCI_ID: 9:0:0 Controller_Name: PERC H710P Adapter Channels: 2 No.of Virtual_Disks: 17 Array_Disks: 0:0:1,0:1:1,0:2:1,0:3:1,0:4:1,0:5:1, 0:6:1, 0:7:1 Persistent Hot Spare: Disabled Firmware Version: 21.2.0-007 Controller_Boot_Mode: 2 (Headless continue on error) Enable_Auto_Import: No T10 Protection Info Capable: No RAIDCFG Command successful!
	-c or controllerid	<valid controller ID number>	Displays the properties for the RAID controller with the specified controller ID. This option combination is mandatory. Example: raidcfg -ctrl -c=31 Controller_ID/Slot_ID: 31 Controller_PCI_ID: 7:0:0 Controller_Name: PERC FD33xS Channels: 1 No.of Virtual_Disks: 1 Array_Disks: 0:0:1,0:2:1,0:3:1,0:4:1,0:7:1,0:8:1,0:10:1,0:12:1,0:14:1,0:15:1 Persistent Hot Spare: Disabled Firmware Version: 25.2.2-0004 Preserved Cache: Not Available Controller_Boot_Mode: 1 (BIOS continue on error) Enable_Auto_Import: Yes T10 Protection Info Capable: Yes Encryption Capable: Yes Encryption Key Present: Yes RAIDCFG Command successful!

Table 1. Enumerating RAID ControllersThe following table describes the RAIDCFG options, parameters, and pre-defined arguments for enumerating RAID controllers.

Mandatory Options and Arguments

Optional Parameters

Valid Parameters Arguments

Description

-ctrl or controller

Lists all the RAID controllers on the host system, along with select property information. This option is mandatory

Example:

raidcfg -ctrl
Controller_ID/Slot_ID: 4
Controller_PCI_ID: 9:0:0
Controller_Name: PERC H710P Adapter
Channels: 2
No.of Virtual_Disks: 17
Array_Disks: 0:0:1,0:1:1,0:2:1,0:3:1,0:4:1,0:5:1, 0:6:1, 0:7:1
Persistent Hot Spare: Disabled
Firmware Version: 21.2.0-007
Controller_Boot_Mode: 2 (Headless continue on error)
Enable_Auto_Import: No
T10 Protection Info Capable: No
RAIDCFG Command successful!

-c or controllerid

<valid controller ID number>

Displays the properties for the RAID controller with the specified controller ID. This option combination is mandatory.

Example:

raidcfg -ctrl -c=31
Controller_ID/Slot_ID: 31
Controller_PCI_ID: 7:0:0
Controller_Name: PERC FD33xS
Channels: 1
No.of Virtual_Disks: 1
Array_Disks: 0:0:1,0:2:1,0:3:1,0:4:1,0:7:1,0:8:1,0:10:1,0:12:1,0:14:1,0:15:1
Persistent Hot Spare: Disabled
Firmware Version: 25.2.2-0004
Preserved Cache: Not Available
Controller_Boot_Mode: 1 (BIOS continue on  error)
Enable_Auto_Import: Yes
T10 Protection Info Capable: Yes
Encryption Capable: Yes
Encryption Key Present: Yes
RAIDCFG Command successful!

Welcome

Welcome to Dell

Dell OpenManage Deployment Toolkit Version 5.4 Command Line Interface Reference Guide

Enumerating RAID Controllers

Rate this content