Dell OpenManage Deployment Toolkit Version 5.4 Command Line Interface Reference Guide

MemOpMode/memoperatingmode

Table 1. MemOpMode/memoperatingmodeThe following table describes the valid arguments of MemOpMode/memoperatingmode and the systems on which it is applicable.
Valid Arguments	On systems prior to 12G: optimizer, mirror, advancedecc On 12G and later systems: OptimizerMode, SpareMode, MirrorMode, AdvEccMode, SpareWithAdvEccMode
Description	Selects the memory operating mode. This feature is active only if a valid memory configuration is detected. When OptimizerMode is enabled, the DRAM controllers operate independently in 64-bit mode and provide optimized memory performance. When MirrorMode is enabled, only half of the installed memory is reported as available to the operating system. When AdvECCMode is enabled, the two DRAM controllers are combined in 128-bit mode to provide optimized reliability. Memory that cannot be teamed by the controllers is not reported to the operating system. When SpareMode is enabled, the memory size reported to the operating system does not include the spare portion. Example: A:>syscfg --memoperatingmode=optimizer memoperatingmode=optimizer
Applicable Systems	PowerEdge 11G and later systems