Enumerating
Array Disks
The following table lists the RAIDCFG options, parameters, and pre-defined
arguments for enumerating array disks (hard-drives).
NOTE You can also use pdisk or -pd instead of adisk or -ad to specify an array disk.
Table 1. Enumerating
Array Disks (Hard Drives)The following table describes the RAIDCFG options, parameters,
and pre-defined arguments for enumerating array disks (hard-drives).
Mandatory Options and Arguments |
Optional Parameters |
Valid Parameters/ Arguments |
Description |
-ad -c=id or adisk controllerid=id |
NA |
NA |
Lists all the array disks attached
to the specified RAID controller. This option combination is mandatory. NOTE The following
example displays the output of a Series 7 controller. NOTE The software controller
does not display the NegSpeed, CapSpeed, Certified and Supported parameters. Example: A:>raidcfg -ad -c=2
Controller: PERC H710P Adapter
****** Physical Drive ******
Vendor: DELL(tm)
Model: ST3300657SS
Protocol: SAS
Media: HDD
NegSpeed: 6144 Mbps
CapSpeed: 6144 Mbps
Certified: YES
Supported: YES
Location: 0:7:1
Size: 285568 MB (278 GB)
Avail: 285568 MB (278 GB)
PowerState: Spun Up
SMARTState: No Error
DiskState: Ready
Encryption Capable: No
Secured: Not Applicable
Sector Size: 512B
T10 Protection Info Capable: No
****** Physical Drive ******
Vendor: DELL
Model: ST500NM0011
Protocol: SATA
Media: HDD
NegSpeed: 3072 Mbps
CapSpeed: 3072 Mbps
Certified: YES
Supported: YES
Location: 0:4:1
Size: 476416 MB (465 GB)
Avail: 0 MB
PowerState: Spun Up
SMARTState: No Error
DiskState: Online
Encryption Capable: No
Secured: Not Applicable
Sector Size: 512B
T10 Protection Info Capable: No
****** Physical Drive ******
Vendor: DELL
Model: SAMSUNG HE253GJ
Protocol: SATA
Media: HDD
NegSpeed: 3072 Mbps
CapSpeed: 3072 Mbps
Certified: YES
Supported: YES
Location: 0:7:1
Size: 237824 MB (232 GB)
Avail: 0 MB
PowerState: Spun Up
SMARTState: No Error
DiskState: Online
Encryption Capable: No
Secured: Not Applicable
Sector Size: 512B
T10 Protection Info Capable: No
RAIDCFG Command successful! |
|
-vd=id or vdisk=id |
|
Lists the array disks that make
up the virtual disk on the specified RAID controller. This option
combination is mandatory. Example: A:>raidcfg -ad -c=4 -vd=0
Controller: PERC H710P Adapter
****** Physical Drive ******Drive
Vendor: DELL (tm)
Model: ST3450757SS
Protocol: SAS
Media: HDD
MedSpeed: 6144 Mbps
CapSpeed: 6144 Mbps
Certified: YES
Supported: YES
Location: 0:0:1
Size: 428672 MB (418 GB)
Avail: 0 MB
PowerState: Spun Up
SMARTState: No Error
DiskState: Online
Encryption Capable: Yes
Secured: No
Sector Size: 512B
T10 Protection Info Capable: No
RAIDCFG Command successful! |
-ad -c=id or adisk controllerid=id |
-ad= ch:targ,ch:t arg,... adisk= channel:tar
get, channel:tar get,... |
|
Displays information about the
specified array disk. This option combination is mandatory. Example: A:>raidcfg -ad -c=4 -ad=
0:0:1
****** Physical Drive ******
Vendor: DELL(tm)
Model: ST3450757SS
Protocol: SAS
Media: HDD
MegSpeed: 6144 Mbps
CapSpeed: 6144 Mbps
Certified: YES
Supported: YES
Location: 0:0:1
Size: 428672 MB (418 GB)
Avail: 0 MB
PowerState: Spun Up
SMARTState: No Error
DiskState: Online
Encryption Capable: Yes
Secured: No
Sector Size: 512 MB
T10 Protection Info Capable: No RAIDCFG Command successful! |