Dell Hybrid Client version 2403 Administrator's Guide

Reimage using Wyse Management Suite

Dell Hybrid Client can be reimaged from Wyse Management Suite. Reimage process will completely reinstall Dell Hybrid Client.

NOTE: Ensure that you have backed up the data on the target device before you begin the reimage process.

Log in to Wyse Management Suite.
Go to the Devices and select Devices from the list.
Click on More Actions and Click Reimage.
Reimage Alert Message Will Pop up in Wyse Management Suite.
Click Send Command and it will initiate Reimage.
Device End will prompt reimage notification.
Click Update Now.
Device will reboot and start booting from Recovery and will prompt for TPM Clear. Press F12 (Only for FDE image).
Figure 1. TPM Clear
After clicking F12, device will reboot and continue to install FDE.
Click Install FDE. It will also auto execute in 30s (Only for FDE image).
Figure 2. Install FDE
Dell Hybrid Client with Full Disk Encryption will begin the installation (Only for FDE image). Once installation is complete, the user will be redirected to Dell Hybrid Client Login Screen.
NOTE: During installation, device will reboot multiple times. The process should not be interrupted.
The device boots into Dell Hybrid Client when the installation is complete. The device will be registered to Wyse Management Suite.