Dell Hybrid Client version 2403 Administrator's Guide

Register Dell Hybrid Client if Skipped Registration in Setup wizard

1. Log in to Dell Hybrid Client as a guest user. By default, the username is guest and there is no password by default for guest username.
2. Configure the following options:
   1. On the top bar, click (System Information icon).

      The System Information window is displayed.

   2. In the Hardware section, note the serial number of the device. This acts as the default password to launch Dell Client Agent. The password is case-sensitive.
   3. Click the Show Application icon on the desktop screen.

      The Applications Overview screen is displayed.

   4. Click the Device Settings icon.

      The Device Settings pane is displayed.

   5. Click Dell Client Agent.

      The Authentication Required window is displayed.

   6. Enter the serial number of the device and click Authenticate.

      Upon successful authentication, the Dell Client Agent window is displayed.

3. Click Registration.
   The default status is displayed as Discovery In Progress.
4. To register manually, click the Cancel button.
5. In the WMS Server field, enter the URL of the Wyse Management Suite server.
6. In the Group Token field, enter your group registration key. The group token is a unique key for registering your devices to groups directly.
   NOTE:If the tenant and group fields are empty, the device is registered to the unmanaged group. However, the group token is mandatory for registering the device to a public cloud.
7. Click the ON/OFF button to enable or disable the Validate Server Certificate CA option. Enable this option to perform the server certificate validation for all device-to-server communication.
   The CA Validation option is enabled automatically and cannot be disabled if a public cloud URL is entered.
8. Click Register to register your device on the Wyse Management Suite server.

   When your device is successfully registered, the status is displayed as Registered with the green color tick next to the Registration Status label. The caption of the Register button changes to Unregister.

   NOTE:Once the device is registered, the password to launch Dell Client Agent will be set to the system password.