Network Configuration using Device Settings
Use the
Device Settings window on Dell Hybrid Client to configure the network settings.
Steps
-
Log in to the device powered by Dell Hybrid Client.
-
Click the
Show Application icon on the desktop screen.
The
Applications Overview screen is displayed.
-
Click the
Device Settings icon.
The
Device Settings window is displayed.
-
Click
Network Configuration.
-
Configure the following network settings based on your requirement:
- Bluetooth—Use this option to configure Bluetooth.
Click the
Bluetooth tab, and do the following:
- Click the
Advanced settings.
- Click the
ON/OFF button to enable or disable Bluetooth.
- VPN—Use this option to configure the VPN settings. This option is available from Dell Hybrid Client version 1.5 onwards.
Click the
VPN tab, and do the following:
- Click the
VPN toggle switch to enable the VPN connection.
- In the
VPN Server URL field, enter the IP address, hostname, or FQDN of the VPN server.
- From the
Protocol drop-down list, select either
CiscoAnyConnect or
GlobalProtect based on your preference.
- To configure wireless, select
Wi-Fi from
and click your Wi-Fi network from the list of available networks.
-
Close the application.
Network Configuration using Wyse Management Suite
Use the
Wyse Management Suite on Dell Hybrid Client to configure the network settings.
Steps
-
Log in to
Wyse Management Suite.
-
Go to the
Groups & Configs page and select your preferred device group.
-
Click
Edit Polices >
Dell Hybrid Client 2. x.
The
Configuration Control | Dell Hybrid Client 2.x page is displayed.
-
Click the
Advanced tab.
-
Expand
Network Drives and click
Network Drives List.
-
Click on
Add Row and configure
network drive entry.
-
Click
Save & Publish.
Open
Dell File Explorer on your device. All the configured network drives are listed under the
External Files section.