Dell Hybrid Client version 2403 Administrator's Guide

Configuring the Display Settings

Use the Device Settings window on the Dell Hybrid Client to configure your monitor. You can also configure the display settings using Wyse Management Suite.

1. Log in to the device powered by Dell Hybrid Client.
2. Click the Show Application icon on the desktop screen.
   The Applications Overview screen is displayed.
3. Click the Device Settings icon.
   The Device Settings window is displayed.
4. Click Monitor Settings.
5. Click IDENTIFY MONITORS to identify the connected monitors.
6. Click ADDITIONAL MONITOR SETTINGS to configure the monitor settings.
7. Click Displays tab to configure the following settings:
   • Click Join Displays to join the edges of two displays and create a larger display space. This setting is only available when you connect two or more monitors.
   • Click Mirror to mirror the content from the primary display to the other connected displays. This setting is only available when you connect two or more monitors.
   • Click Single Display to have only the selected display activated. This setting is only available when you connect two or more monitors.
   • Click the Orientation drop-down list to select the orientation.
   • Click the Resolution drop-down list to select the resolution.
   • Click the Refresh Rate drop-down list to select the refresh rate.
   • Enable the Adjust for TV toggle key to resize the display according to a connected TV.
   • Click 100% or 200% next to Scale for scaling the resolution.
   • Enable or disable fractional scaling using the Fractional Scaling toggle key.
8. Click the Night Light tab to configure the following settings:
   • Enable or disable the night light options using the Night Light toggle key.
   • Click the Schedule drop-down to choose Sunset to Sunrise or Manual Schedule.
   • Click + or - to set From and To for manually scheduling night light.
   • Use the Color Temperature slider to select Less warm or More warm.
9. Click Apply.
   NOTE:To apply display configurations from WMS, disable the monitor settings from Account Privileges to use Single or Multiple display settings.

   NOTE:When you turn off and turn on the monitor during an active VDI session, the session is minimized and you must maximize the session, or close the session and launch back for full screen mode.