Dell Hybrid Client version 2403 Administrator's Guide

Configure the wired and wireless Advanced Network Settings

1. On the Advanced Settings screen, click Network Configuration.
2. Click the Ethernet tab and configure the following options for a wired connection:
   • Auto—If you configure the Ethernet settings through the DHCP options, the Auto toggle key is turned on.
   • Manual—If your device is not connected to any network, you can manually create an Ethernet connection.

     To create an Ethernet connection manually, configure the following options:

     • Click the Manual toggle key to enable the manual method.
     • From the IPv4 Method drop-down list, select the type of IPv4 configuration.
     • Enter the IP address of the DNS server in the IPv4 DNS field.
     • Enter the domain for DNS lookups in the IPv4 DNS search field.
     • Click the IPv4 Ignore Auto DNS toggle key to ignore the automatically configured DNS.
     • Enter the IP route in the IPv4 Routes field.
     • Click the IPv4 Ignore Auto Routes toggle key to ignore the automatically configured routes.
     • Enter the IP address of the connection in the IPv4 ip4 field.
     • Enter the default Gateway in the IPv4 gw4 field.
     • Enter the network mask in the IPv4 Netmask field.
     • Enter the size of the Maximum Transmission Unit in the MTU field.
3. Click the Wireless tab and configure the options for a wireless connection. This option is available only if the device is connected to WiFi. The wireless network name (SSID) is automatically displayed upon successful connection.
   1. Enter the IP address of the DNS server in the IPv4 DNS field.
   2. Click the IPv4 Ignore Auto DNS toggle key to ignore the automatically configured DNS.
4. Click Save & Apply.