Use the
Device Settings window on Dell Hybrid Client to configure the power settings. You can also configure the power settings using Wyse Management Suite.
Steps
Log in to the device powered by Dell Hybrid Client.
Click the
Show Application icon on the desktop screen.
The
Applications Overview screen is displayed.
Click the
Device Settings icon.
The
Device Settings menu is displayed.
Click
Power Settings, and configure the following settings:
Power Saving—Use this option to configure the
Power Saving settings.
Click the
Power Saving tab, and do the following:
Click the
Enable or Disable WiFi to save power toggle key to disable WiFi to save power.
Click
Save & Apply.
NOTE:Use the
Reset to Default button to reset your settings to default values. Wyse Management Suite configurations are applied if they are published before clicking the
Reset to Default button.
Reset to Default
resets only the for current page.
NOTE:To discard your unsaved changes across the application, click the
Discard Changes button.
Suspend & Power—Use this option to configure the
Suspend & Power settings.
Click the
Suspend & Power tab, and do the following:
From the
Blank Screen drop-down list, select the idle time after which the blank screen is to be displayed.
Click the
Auto Suspend toggle key to enable the device to enter the power state automatically after the specified idle time.
From the
Delay drop-down list, select the time to wait after a period of inactivity.
From the
Power Button Action, select the action of the Dell Hybrid Client to be performed after the idle time has elapsed. The following are the available options:
Suspend
Power Off
Nothing
Power off and Restart—If this option is selected, you must manually log out of your user account.
Click
Save & Apply.
NOTE:Use the
Reset to Default button to reset your settings to default values. Wyse Management Suite configurations are applied if they are published before clicking the
Reset to Default button.
Reset to Default
resets only the for current page.
NOTE:To discard your unsaved changes across the application, click the
Discard Changes button.
Power Profile—Use this option to configure the
Power Profile settings. This option is available from Dell Hybrid Client version 1.5 onwards.
Click the
Power Profile tab, and do the following:
From the
Power Profile drop-down list, select one of the following options:
Energy Saving—This mode saves power on your device by reducing system performance.
Balanced—By default, the Balanced power mode is selected. This mode balances energy consumption and system performance by adapting the processor speed of the device to your activity.
Maximum Performance—This mode maximizes system performance by running processor at higher speeds.
Click
Save & Apply.
NOTE:Use the
Reset to Default button to reset your settings to default values. Wyse Management Suite configurations are applied if they are published before clicking the
Reset to Default button.
Reset to Default
resets only the for current page.
NOTE:To discard your unsaved changes across the application, click the
Discard Changes button.
Close the application.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\