Use the
Device Settings window on Dell Hybrid Client to configure the network drive. You can also configure the network drive using Wyse Management Suite.
Steps
Log in to the device powered by Dell Hybrid Client.
Click the
Show Application icon on the desktop screen.
The
Applications Overview screen is displayed.
Click the
Device Settings icon.
The
Device Settings window is displayed.
Click
Network Drive Settings.
To add a network drive, click the
Add button.
A network drive entry is created.
Click the network drive entry and configure the following options:
Enter the name for the network drive.
NOTE:The network drive name must be unique across Wyse Management Suite configuration and Device Settings.
Enter the address of the server in the form of URL.
If you are using the network share type as SMB/Samba or CIFS, enter the share URL in the format //serverIP/ path. For example, //10x.10x.1x.1xx/test.
If you are using the network share type as FTPS, enter the share URL in the format serverIP. For example,10x.10x.1x.1xx. You must preconfigure the certificates if you are setting up FTPS network share.
Select the type of the network share—Smb/Samba, CIFS, or FTPS.
If you want anonymous users to access the network share, click the Anonymous mode toggle key.
If you want specific users to access the network share, disable the Anonymous mode, and specify the username, password, and the domain name.
To add multiple network drives, repeat step 5.
Click
Save & Apply.
Next steps
Open Dell File Explorer on your device. All the configured network drives are listed under the
External Files section.
NOTE:The configured network drives load automatically after user logs in to the device.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\