Dell Hybrid Client version 2403 Administrator's Guide

Configure SCEP locally

Use the SCEP window under Advanced Settings to configure the SCEP options. These options can be used in scenarios where a one time password needs to be set or a policy such as password expires in 10 minutes must be configured.

1. On the Advanced Settings screen, click SCEP.
2. To enroll a certificate, click the Add button.
   A SCEP entry is created.
3. Click the SCEP entry and specify the following details:
   1. Enter the certificate name.
      NOTE:The certificate name must be unique across Wyse Management Suite configuration and Device Settings.

      NOTE:SCEP can be configured with device serial number as SCEP certificate name. The special characters that can be used for this are $SN and $sn. These special characters can be used in 802 configuration also as SCEP certificate name.
   2. Select the authentication mode.
   3. Enter the SCEP URL.
   4. Enter the Challenge Password.
4. To add multiple certificates, repeat step 2.
5. Click Save & Apply.