Configure a network drive using Wyse Management Suite
A network drive is a drive or share that you can access over a network. Dell Hybrid Client enables you to mount or map a network shared drives using network file sharing protocols. The supported protocols are Server Message Block (SMB), Common Internet File System (CIFS), FTPS, and Samba Share.
Steps
Log in to Wyse Management Suite.
Go to the
Groups & Configs page, and select your preferred group.
Click
Edit Policies > Dell Hybrid Client 2.x.
The
Configuration Control | Dell Hybrid Client 2.x page is displayed.
Click the
Advanced tab.
Expand
Network Drives, and click
Network Drivers List.
Click
Add Row.
In the
Network drives settings section, do the following:
In the
Name field, enter a name for your network drive or share.
From the
Type drop-down list, select the type of the network share—Smb/Samba,
CIFS, or
FTPS.
NOTE:FTPS network drives get mounted only when appropriate certificates are added, such as Iris.local and Cert. You can use the certificate option under
Privacy & Security on Wyse Management Suite to install the certificates on Dell Hybrid Client.
In the
Share URL field, enter the address of the server in the form of URL.
If you are using the network share type as
SMB/Samba or
CIFS, enter the share URL in the format
//serverIP/path. For example,
//1xx.1xx.1x.1xx/test.
If you are using the network share type as
FTPS, enter the share URL in the format
serverIP. For example,
105.105.55.122.
If you want anonymous users to access the network share, enable the
Anonymous mode toggle key.
NOTE:By default Anonymous mode is disabled.
If you want specific users to access the network share, disable the
Anonymous mode, and do the following:
Enter the username.
Enter the password.
Enter the domain name.
Click
Save & Publish.
Log in to Dell Hybrid Client, open
File Explorer, and access the network shared drive that you have mapped.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\