Dell Hybrid Client version 2403 Administrator's Guide

Device compliant

System Password Compliant and BIOS Password Compliant.

When the System and BIOS passwords are changed, the device compliance status on the Devices page on Wyse Management Suite displays green.

When you hover over the green mark, the status is displayed as Compliant. If the default System or BIOS password is not changed, the device compliance status shows red. When you hover over the red mark, the status is displayed as System/BIOS password not changed. The administrator must change both the System and BIOS passwords to change the device status to Compliant, and to display the device-compliant status as green.

If the same device is unregistered and registered again, the changed System password is resynchronized during check-in to Wyse Management Suite. The device compliance status shows green, and the administrator does not have to change the System password again.

You can use the Wyse Management Suite console to view the System password. For more information about how to view the System password, see View the System password.

If the device registration fails, the administrator can still generate a System password using the serial number and Universally Unique Identifier (UUID) of that particular device. For more information about how to generate the System password, see Generate the default System password.