Dell Hybrid Client version 2403 Administrator's Guide

Configure the date and time using Wyse Management Suite

Use Wyse Management Suite to configure the date and time settings for the Dell Hybrid Client.

1. Log in to Wyse Management Suite.
2. Go to the Groups & Configs page, and select your preferred group.
3. Click Edit Policies > Dell Hybrid Client 2.x.
   The Configuration Control | Dell Hybrid Client 2.x page is displayed.
4. Click the Advanced tab.
5. Expand Region & Language Settings, and click Region and Time.
6. Click the Auto Time Zone toggle key to ON state to allow the device to automatically update the system time based on the geographical location. This option is enabled by default and is set based on the Internet provider time zone.
7. If the Auto Time Zone option is not enabled, select the time zone from the drop-down list.
8. From the Time Format drop-down list, select the time format—12 Hours or 24 Hours.
9. To configure the time server, do the following:
   1. Under the Advanced tab, expand Region & Language Settings, and click Time Server.
   2. Specify the FQDN or IP address of the time server. Maximum allowed length is 127 characters.
      NOTE:You can configure multiple time servers. Each value must be separated by a semicolon.

      NOTE:By Default Auto Time Zone is enabled.
10. Click Save and Publish.