Dell Hybrid Client version 2403 Administrator's Guide

Configure the advanced settings

Use the Advanced Settings page on Dell Hybrid Client to configure the settings for Troubleshooting, Terminal, SCEP, and Network connection. The Advanced Settings page is password-protected and is accessible only after the authentication is successful.

1. Log in to the device powered by Dell Hybrid Client.
2. Click the Show Application icon on the desktop screen.
   The Applications Overview screen is displayed.
3. Click the Device Settings icon.
   The Device Settings pane is displayed.
4. Click Advanced Settings.
   The Authentication Required window is displayed.
5. Enter the System password and click Authenticate.
   Upon successful authentication, the Advanced Settings screen is displayed.
6. On the Advanced Settings screen, configure the following options:
   • Troubleshooting—Use this option to troubleshoot your device. See, Configure the troubleshooting options.
   • Terminal—Use this option to access the terminal window to run root commands using sudo. See, Access the terminal window.
   • SCEP—Use this option to add a SCEP certificate. See, Configure SCEP locally.
   • Network Configuration—Use this option to configure the wired and wireless network connection. See, Configure the wired and wireless network settings.
7. Close the application.
   If the system is idle for 5 minutes or the Advanced Settings window is closed, Administrator needs to re-authenticate to view the Advanced Settings window.