Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

View sFlow® information

OS10 does not support statistics for UDP packets dropped and samples received from the hardware.

  • View sFlow® configuration details and statistics in EXEC mode.
    OS10# show sflow
    sFlow services are enabled
    Management Interface sFlow services are disabled
    Global default sampling rate: 32768
    Global default counter polling interval: 30
    Global default extended maximum header size: 128 bytes
    Global extended information enabled: none
    1 collector(s) configured
    Collector IP addr:10.16.151.245 Agent IP addr:10.16.132.181 UDP port:6343 VRF:Default
    31722 UDP packets exported
    0 UDP packets dropped
    34026 sFlow samples collected
  • View sFlow® configuration details on a specific interface in EXEC mode.
    OS10# show sflow interface port-channel 1
    port-channel1
    sFlow is enabled on port-channel1

    If sFlow® is enabled and the port channel does not have any member interfaces, you will see a message similar to the following:

    SFlow is not enabled (or) SFlow enabled and Port channel has no members
  • View the sFlow® running configuration in EXEC mode.
    OS10# show running-configuration sflow
    sflow enable
    sflow max-header-size 80
    sflow polling-interval 30
    sflow sample-rate 4096
    sflow collector 10.16.150.1 agent-addr 10.16.132.67 6767 max-datagram-size 800
    sflow collector 10.16.153.176 agent-addr 3.3.3.3 6666
    !
    interface ethernet1/1/1
    sflow enable
    !

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\