Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

util-threshold cpu

Sets the CPU utilization threshold values.

Syntax
util—threshold cpu cpu-utilization-time threshold threshold-percentage
Parameters
  • cpu-utilization-time—Set the CPU threshold time:
    • 1min—Set threshold to 1-minute CPU utilization.
    • 5min—Set the threshold to 5-minute CPU utilization.
    • 5sec—Set the threshold to 5-second CPU utilization.
  • threshold—Set the high and low threshold:
    • high—Set the threshold to high.
    • low—Set the threshold to low.
  • threshold-percentage—Enter the threshold percentage, from 0 to 100.
Default
  • High CPU utilization threshold: 1min = 85%, 5min = 80%
  • Low CPU utilization threshold: 1min = 75%, 5min = 70%
Command Mode
CONFIGURATION
Usage Information
The system triggers an alarm each time the configured CPU threshold is crossed. Setting both high and low thresholds to 0 disables CPU utilization monitoring.
The no version of this command returns the CPU thresholds to the default values.
Example
OS10(config)# util-threshold cpu 5min high 80 low 60
Supported Releases
10.5.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\