Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

snmp-server group

Configures the views allowed for the users in an SNMP group.

Syntax
snmp-server group group-name {v1 | v2c | v3 security-level} [access acl-name] [read view-name] [write view-name] [notify view-name]
Parameters
  • group-name — Enter the name of the group. A maximum of 32 alphanumeric characters.
  • v1 — SNMPv1 provides no user authentication or privacy protection. SNMP messages are sent in plain text.
  • v2c — SNMPv2c provides no user authentication or privacy protection. SNMP messages are sent in plain text.
  • v3 security-level — SNMPv3 provides optional user authentication and encryption for SNMP messages, configured with the snmp-server user command.
  • security-level — (SNMPv3 only) Configure the security level for SNMPv3 users:
    • auth — Authenticate users in SNMP messages.
    • noauth — Do not authenticate users or encrypt SNMP messages; send messages in plain text.
    • priv — Authenticate users and encrypt/decrypt SNMP messages.
  • access acl-name — (Optional) Enter the name of an IPv4 or IPv6 access list to filter SNMP requests received on the switch. A maximum of 16 characters.
  • read view-name — (Optional) Enter the name of a read-only view. A maximum of 32 characters maximum.
  • write view-name — (Optional) Enter the name of a read-write view. A maximum of 32 characters maximum.
  • notify view-name — (Optional) Enter the name of a notification view. A maximum of 32 characters maximum.
Defaults
Not configured
Command Mode
CONFIGURATION
Usage Information
Use this command to set up the access privileges for a group of SNMP users. Configure the security level for receiving SNMP messages. Specify read-only, read-write, and/or notification access to the SNMP agent. To configure an SNMPv3 user's authentication and privacy settings, use the snmp-server user command.

Enter an access acl-name value to limit access to the SNMP agent to only ACL-allowed users.

A read-view provides read-only access to the SNMP agent. A read-write view allows read-write access. A notify-view allows SNMP notifications to be sent to group members.

The no version of the command deletes an SNMP group.

Example
OS10(config)# snmp-server group os10admin p3 priv read readonlyview
Supported Releases
10.4.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\