Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show vlt mismatch dhcpv6-relay

Displays the mismatch (if any), between the VLT peer for the DHCPv6 relay options configuration on the Global level, VLT port-channel, and VLANs and VxLANs spanned across the VLT peers.

Syntax
show vlt vlt-domain mismatch dhcpv6-relay
Parameters
None.
Defaults
None
Command Mode
EXEC
Security and access
This command is restricted to the netadmin, secadmin, and sysadmin roles.
Usage Information

This command shows the mismatch in the following parameters:

  • dhcpv6 hostname.
  • global interface-id and remote-id enable/disable status.
  • prefix configuration of both interface-id and remote-id.
  • remote-id customized description configuration.
  • interface-id customized description configuration for vlt port-channel, spanned vlan and vxlans.
  • Status of the source-interface configuration; whether present or not present.

This command is restricted to netadmin, secadmin, and sysadmin role users.

Example (Interface)
OS10(conf-if-po-20)# do show vlt 100 mismatch dhcpv6-relay 

Global relay Configuration Mismatch
------------------------------------------------------------

DHCPv6 Hostname Mismatch:
VLT Unit ID               Hostname
---------------------------------------------------------------
* 1                       Present (DELL)
  2                       Not Present 

Remote-id Mismatch:
VLT Unit ID    Status          prefix                             description  
---------------------------------------------------------------------------------
* 1            -              hostname                            default
  2            -              hostname-vrfname                    custom(force10)


Interface-id Mismatch:
VLT Unit ID    Status         prefix 
---------------------------------------------------------
* 1           -               hostname
  2           -               custom(DELL)


Interface Relay Configuration Mismatch
---------------------------------------------------------
VLAN: 10

VLT Unit ID     description              Source-Interface
---------------------------------------------------------
* 1             default                   -
  2             custom(santaclara)        -

VNI: 20

VLT Unit ID      description            Source-Interface
---------------------------------------------------------
* 1              custom(force10)         Present
  2              default                 Not Present

VLT-PORTCHANNEL: 100

VLT Unit ID     description               Source-Interface
---------------------------------------------------------
* 1             custom(force10)            Present
  2             custom(santaclara)         Not Present
Note : - Represent no mismatch. 
Supported Releases
10.5.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\