Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show switchport port-security

Displays port security information of interfaces.

Syntax
show switchport port-security [interface {ethernet node/slot/port[:subport] | port-channel port-channel-number}]
Parameters
  • interface — Displays the interface type:
    • ethernet node/slot/port[:subport] — Displays the port security information of an Ethernet interface.
    • port-channel channel-number — Displays the port security information of an Ethernet interface. Valid values are from 1 to 999 or 1001 to 2000.
Default

None

Command Mode
EXEC
Usage Information

This command displays port security information of all interfaces.

Example (Address)
OS10# show switchport port-security

Global Port-security status       :Enable

Interface name                    : eth1/1/1

Port Security                     :Enabled
Port Status                       :Error-Disable
Mac learn limit                   :100
MAC-learn-limit-Violation action  :Shutdown
Sticky                            :Disabled  
Mac-move-allow                    :Not Allowed
mac-move-violation action         :shutdown-both
Aging                             :Enabled
Total MAC Addresses               :10
Secure static MAC Addresses       :0
Sticky MAC Addresses              :10
Secure Dynamic MAC addresses      :0

Interface name                    : eth1/1/10

Port Security                     :Enabled 
Port Status                       :Error-Disable
Mac learn limit                   :100
MAC-learn-limit-Violation action  :Shutdown
Sticky                            :Disabled 
Mac-move-allow                    :Not Allowed
mac-move-violation action         :shutdown-both
Aging                             :Enabled
Total MAC Addresses               :11
Secure static MAC Addresses       :0
Sticky MAC Addresses              :0
Secure Dynamic MAC addresses      :11
OS10# show switchport port-security interface ethernet 1/1/1

Global Port-security status       :Enable

Interface name                    : ethernet1/1/1

Port Security                     :Enabled
Port Status                       :Error-Disable
Mac-learn-limit                   :1024
MaC-learn-limit-Violation Action  :Shutdown
Sticky                            :Enabled
Mac-move-allow                    :Not Allowed
Mac-move-violation                :shutdown-both
Aging                             :Disbaled
Total MAC Addresses               :10
Secure static MAC Addresses       :0
Sticky MAC Addresses              :10
Secure Dynamic MAC addresses      :0

OS10# show switchport port-security interface port-channel 120

Interface name                    : port-channel 120

Port Security                     :Disabled
Port Status                       : Up
mac-learning-limit                :1024
Mac-learn-limit-Violation Action  :Flood
Sticky                            :Enabled
Mac-move-allow                    :Allowed
Mac-move-violation                :shutdown-offending
Aging                             :Disabled
Total MAC Addresses               :11
Secure static MAC Addresses       :0
Sticky MAC Addresses              :11
Secure Dynamic MAC addresses      :0
Supported Releases
10.5.1.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\