Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show ptp interface

Displays PTP information about the interface.

Syntax
show ptp interface [{ethernet node/slot/port[:subport]} | {port-channel port-channel-id}]
Parameters
  • ethernet node/slot/port[:subport]—Enter the Ethernet interface information.
  • port-channel port-channel-id—Enter the port channel ID, from 1 to 999 or 1001 to 2000.
Defaults
None
Command Mode
EXEC
Security and Access
Netadmin and sysadmin
Usage Information

For boundary clocks, this command indicates if the port is enabled or disabled. This command is not applicable for transparent clocks.

Example 
OS10# show ptp interface
Interface : Ethernet1/1/22
    PTP                                 : Enabled
    Port Identity                       : 68:4f:64:ff:ff:01:db:ec:1
    Port State                          : Slave
    Vlan                                :
    Transport                           : Ipv4-multicast
    Log Delay Request Minimum interval  : -4
    Log Announce Interval               : 1
    Announce Receipt Timeout Multiplier : 3
    Log Sync Interval                   : -4
    Delay Mechanism                     : End-to-end
Interface : Ethernet1/1/23
    PTP                                 : Enabled
    Port Identity                       : 68:4f:64:ff:ff:01:db:ec:2
    Port State                          : Master
    Vlan                                :
    Transport                           : Ipv4-multicast
    Log Delay Request Minimum interval  : -4
    Log Announce Interval               : 1
    Announce Receipt Timeout Multiplier : 3
    Log Sync Interval                   : -4
    Delay Mechanism                     : End-to-end
Supported Releases
10.5.1.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\