Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show lacp port channel

Displays information about LACP port channels.

Syntax
show lacp port-channel [interface port-channel channel-number]
Parameters
  • interface port channel—(Optional) Enter the interface port channel.
  • channel-number—(Optional) Enter the port channel number for the LACP neighbor. Valid values are from 1 to 999 or 1001 to 2000.
Default
Not configured
Command Mode
EXEC
Usage Information
All channel groups display if you do not enter the channel-number parameter.
This command is useful to determine if the LACP individual port feature is enabled or disabled on the port-channel interface.
Example
OS10# show lacp port-channel 1
  
Port-channel 1 admin up, oper up, mode lacp
Actor System ID: Priority 32768, Address 90:b1:1c:f4:9b:8a
Partner System ID: Priority 32768, Address 00:01:e8:8a:fd:9e
Actor Admin Key 1, Oper Key 1, Partner Oper Key 1
LACP LAG ID 1 is an aggregatable link
A-Active LACP, B-Passive LACP, C-Short Timeout, D-Long Timeout
E-Aggregatable Link, F-Individual Link, G-IN_SYNC, H-OUT_OF_SYNC,
I-Collection enabled, J-Collection disabled, K-Distribution enabled,
L-Distribution disabled, M-Partner Defaulted, N-Partner Non-defaulted,
O-Receiver is in expired state, P-Receiver is not in expired state
Port ethernet1/1/29 is Enabled, LACP is enabled and mode is lacp
 Actor Admin: State BCFHJKNO Key 1 Priority 32768
     Oper: State BDEGIKNO Key 1 Priority 32768
 Partner Admin: State BCEGIKNP Key 0 Priority 0
     Oper: State BDEGIKMO Key 1 Priority 32768
Example (LACP individual port)
OS10# show lacp port-channel interface port-channel 100

Port-channel 100 admin up, oper down, mode lacp

Actor System ID: Priority 32768, Address 14:18:77:09:d2:80

Partner System ID: Priority 0, Address 00:00:00:00:00:00

Actor Admin Key 100, Oper Key 100, Partner Oper Key 0

Individual: Enabled

Fallback: Not configured, Fallback port preemption: Configured, Fallback timeout: 15 seconds

Fallback Port Elected:

LACP LAG ID 100 is an aggregatable link

A - Active LACP, B - Passive LACP, C - Short Timeout, D - Long Timeout

E - Aggregatable Link, F - Individual Link, G - IN_SYNC, H - OUT_OF_SYNC,

I - Collection enabled, J - Collection disabled, K - Distribution enabled,

L - Distribution disabled, M - Partner Defaulted, N - Partner Non-defaulted,

O - Receiver is in expired state, P - Receiver is not in expired state

Port ethernet1/1/1 is Disabled, LACP is enabled and mode is

Actor Admin: State BDFHJLNP Key  Priority

     Oper: State BDFHJLNP Key  Priority

Partner Admin: State BDFHJLNP Key  Priority

     Oper: State BDFHJLNP Key  Priority
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\