Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show ipv6 route

Displays IPv6 routes.

Syntax
show ipv6 route [vrf vrf-name] [all | bgp | connected | static | A::B[/mask] | summary]
Parameters
  • vrf vrf-name—(Optional) Enter vrf then the name of the VRF to display IPv6 routes corresponding to that VRF. If you do not specify this option, routes corresponding to the default VRF display.
  • all—(Optional) Displays all routes including nonactive routes.
  • bgp—(Optional) Displays BGP route information.
  • connected—(Optional) Displays only the directly connected routes.
  • static—(Optional) Displays all static routes.
  • A::B[/mask]—(Optional) Displays details of a particular IPv6 destination prefix from the IPv6 routing table matching the IPv6 destination address and mask. When the prefix alone is given, this command displays the IPv6 Longest Prefix Match (LPM) route, if it exists in the routing table.
  • summary—(Optional) Displays the IPv6 route summary.
Default
Not configured
Command Mode
EXEC
Usage Information
None
Example (All)
OS10# show ipv6 route all
Codes: C - connected
       S - static
       B - BGP, IN - internal BGP, EX - external BGP
       O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1,
       N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
       E2 - OSPF external type 2, > - non-active route
Gateway of last resort is not set
  Destination     Gateway        Dist/Metric     Last Change
---------------------------------------------------------
Example (Connected)
OS10# show ipv6 route connected
Codes: C - connected
       S - static
       B - BGP, IN - internal BGP, EX - external BGP
       O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1,
       N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
       E2 - OSPF external type 2, > - non-active route
Gateway of last resort is not set
Destination         Gateway            Dist/Metric      Last Change
------------------------------------------------------------------
C    2001:db86::/32 via 2001:db86:fff::1 ethernet1/1/1  0/0 00:03:24
Example (Summary)
OS10# show ipv6 route summary
Route Source        Active Routes  Non-Active Routes
Ospf                0              0
Bgp                 0              0
Connected           0              0
Static              0              0
Ospf Inter-area     0              0
NSSA External-1     0              0
NSSA External-2     0              0
Ospf External-1     0              0
Ospf External-2     0              0
Bgp Internal        0              0
Bgp External        0              0
Ospf Intra-area     0              0
Total               0              0
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\