Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show ip bgp

Displays information that BGP neighbors exchange.

Syntax
show ip bgp [vrf vrf-name] ip-address/mask
Parameters
  • vrf vrf-name — (OPTIONAL) Enter vrf and then the name of the VRF to view route information corresponding to that VRF.
  • ip-address/mask — Enter the IP address and mask in A.B.C.D/x format.
Default
Not configured
Command Mode
EXEC
Usage Information
None
Example
OS10# show ip bgp 1.1.1.0/24
BGP routing table entry for 1.1.1.0/24
Paths: (1 available, table Default-IP-Routing-Table.)

Received from :
3.1.1.1(3.3.3.33) Best

AS_PATH : 100
Next-Hop : 3.1.1.1, Cost : 0

Origin INCOMPLETE, Metric 0, LocalPref 100, Weight  0, confed-external
Route-reflector origin : 0.0.0.0

The following displays the next hop as an unnumbered neighbor with ethernet1/1/1 as the connected interface.

OS10# show ip bgp 31.1.1.0/24
BGP routing table entry for 31.1.1.0/24
Paths: (1 available, table Default-IP-Routing-Table.)

Received from :
fe80::3617:ebff:fef1:dc5e via ethernet1/1/1 (1.1.1.1) Best

AS_PATH :
Next-Hop :ethernet 1/1/1 , Cost : 0

Origin INCOMPLETE, Metric 0, LocalPref 100, Weight 32768,
Route-reflector origin : 0.0.0.0

The following displays the next hop as an unnumbered neighbor with ethernet1/1/1 as the connected interface.

OS10# show ip bgp
BGP local RIB : Routes to be Added , Replaced , Withdrawn
BGP local router ID is 14.233.209.106
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed/network, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
       Network            Next Hop           Metric       LocPrf        Weight          Path
*>r    31.1.1.0/24        0.0.0.0               0           100          32768           ?

*>     41.1.1.0/24      ethernet 1/1/1          0           100          32768           ?
When you filter routes by IP addresses, if the system does not find a match, it displays the following error message:
OS10# show ip bgp 40.40.40.0/24
%Error: Prefix does not exist.
Supported Releases
10.3.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\