Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

show fc fabric interface

Shows the summary of the principal switch election states, ILS link type, port state, reason code, remote switch, and port name.

Syntax
show fc fabric interface
Parameters
None
Defaults
Not applicable
Command Mode
EXEC
Usage Information
  • Use this command to display the summary of principal switch election states, ILS link type, port state, remote switch, and port name.
  • The Fabric states are Build Fabric, Reconfigure Fabric, EFP-Idle, EFP-Send, Principal-Switch, Non-Principal-Switch, No Domain, and Stable states.
  • The Link types are Unknown, Non-Principal ISL, Upstream Principal ISL, and Downstream Principal ISL.
  • The Reason codes are:
    • BB Credit Isolation
    • R_A_TOV Mismatch
    • E_D_TOV Mismatch
    • Flow Control Not Supported
    • Class of Services Not Supported
    • Port Mode mismatch Isolation
    • Invalid Switch Name Isolation
    • Not Capable Principal Switch
    • Domain ID Overlap
    • Isolation due to ELP Failure
    • Isolation due to Loop Back Connection
    • Isolation due to EFP Max Retransmission Exceeded
    • Isolation due to BF Max Retransmission Exceeded
    • Isolation due to RCF Max Retransmission Exceeded
    • Isolation due to DIA Max Retransmission Exceeded
    • Isolation due to RDI Max Retransmission Exceeded
Example
OS10(config)# do show fc fabric interface
Fabric-State : Stable

Vfabric Intf    Link     Port  Reason    Remote           Remote
Id              type     State Code    Switch Name      Port Name
                               
---------------------------------------------------------------
2  fc1/1/25:2 DOWNSTREAM EPORT NONE 10:00:e4:f0:04:3e:3d:95 20:00:e4:f0:04:3e:3e:0f
     
     
2  fc1/1/25:1 NONPRINPLISL EPORT NONE 10:00:e4:f0:04:3e:3d:95 20:00:e4:f0:04:3e:3e:0e
Supported Releases
10.5.1.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\