Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

ptp system-time enable

Configures the PTP clock to set the system time on the switch.

Syntax
ptp system-time enable
Parameters
enable—Enables the PTP clock and sets the system time from the PTP clock.
Defaults
Disabled
Command Mode
CONFIGURATION
Security and Access
Netadmin and sysadmin
Usage Information
When you enable this configuration, PTP sets the system time on the switch only if the servo clock is phase locked. You cannot enable the PTP system time if the system is configured as an NTP client. However, you can enable the PTP system time if the system is configured as an NTP server. The no form of this command removes the configuration.
Example
OS10(config)# ptp system-time enable
Supported Releases
10.5.1.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\