Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

mac address-table static

Configures a static entry for the Layer 2 MAC address table.

Syntax
mac address-table static mac-address {vlan vlan-id | virtual-network VNI} interface {ethernet node/slot/port[:subport] | port-channel number | VLTi}
Parameters
  • mac-address—Enter the MAC address to add to the table in nn:nn:nn:nn:nn:nn format.
  • vlan vlan-id—Enter the VLAN to apply the static MAC address to, from 1 to 4093.
  • virtual-network VNI—Enter the virtual network to apply the static MAC address to, from 1 to 65535.
  • interface—Enter the interface type:
    • ethernet node/slot/port[:subport]—Enter the Ethernet information.
    • port-channel channel-number—Enter a port channel interface number, from 1 to 999 or 1001 to 2000.
    • VLTi—Enter VLTi to configure static MAC address on VLTi interfaces.
Default
Not configured
Command Mode
CONFIGURATION
Usage Information

The no version of this command removes the static MAC address.

When a static MAC configured on a non-VLT port-channel, is not supposed to be learnt on any other port in the VLT peer nodes, then you must configure the same MAC as static MAC on VLTi in the peer VLT node.

You can configure a static MAC on a VLTi even before the VLT domain or VLTi are created.

Un till the time when VLTi is created, the MAC is not installed in the NPU or kernel. Whenever the VLTi is discovered and created, the MAC is installed in the NPU or kernel.

The MAC is removed when the VLTi is removed or the VLT domain is deleted. This option is supported for both VLAN and VN configurations.

Example (VLAN)
OS10(config)# mac address-table static 34:17:eb:f2:ab:c6 vlan 1 interface ethernet 1/1/30
Example (Port-Channel)
OS10(config)# mac address-table static 34:17:eb:02:8c:33 vlan 10 interface port-channel 1
Example (VLTi)
OS10(config)#  mac  address-table static 00:00:00:00:00:01 vlan 1 interface vlti 

OS10(config)#  no mac address-table static 00:00:00:00:00:01 vlan 1 interface vlti

OS10(config)#  mac  address-table static 00:00:00:00:00:aa virtual-network 1 interface vlti 

OS10(config)#  no mac address-table static 00:00:00:00:00:aa virtual-network 1 interface vlti
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\