Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

local-as

Configures a local AS number for a peer.

Syntax
local-as as-number [no-prepend] [replace-as]
Parameters
  • as-number—Enter the local AS number, from 1 to 4294967295.
  • no-prepend—(Optional) Enter so that local AS values are not prepended to the AS_PATH attribute.
  • replace-as—(Optional) Enter so that globally configured AS values are not prepended to the AS_PATH attribute.
Default
Disabled
Command Mode
ROUTER-NEIGHBOR or ROUTER-TEMPLATE
Usage Information

Facilitates the BGP network migration operation and allows you to maintain existing AS numbers. The no version of this command resets the value to the default.

This command is supported only for external BGP (eBGP) autonomous system migration, and it is not supported for internal BGP (iBGP) autonomous system migration.

After configuring the replace-as option, clear the BGP session.

The no local-as command deletes the local-as configuration. The no local-as no-prepend command removes both local and globally-configured AS numbers from the AS_PATH attribute and leaves the local-as local-as configuration intact.

Example (Neighbor)
OS10(conf-router-bgp-10)# neighbor lunar
OS10(conf-router-neighbor)# local-as 20 
Example (Template)
OS10(conf-router-bgp-10)# template solar
OS10(conf-router-template)# local-as 20 
Example (Replace AS)
OS10(conf-router-bgp-10)# neighbor SJC
OS10(conf-router-template)# local-as 20 no-prepend replace-as
Supported Releases
10.3.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\