Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

image install

Installs a new image or firmware file from a previously downloaded file or from a remote location.

Syntax
image install file-url
Parameters
  • file-url—Location of the image or firmware file:
    • ftp://userid:passwd@hostip/filepath—Enter the path to install from a remote FTP server.
    • http://hostip/filepath—Enter the path to install from the remote HTTP server.
    • scp://userid:passwd@hostip/filepath—Enter the path to install from a remote SCP file system.
    • sftp://userid:passwd@hostip/filepath—Enter the path to install from a remote SFTP file system.
    • tftp://hostip/filepath—Enter the path to install from a remote TFTP file system.
    • image://filename—Enter the path to use to install the image from a local file system.
    • usb://filepath—Enter the path to use to install the image from the USB file system.
    • https://hostip/filepath [insecure] - Enter the HTTPS path to install the image using the HTTPS protocol. Use the insecure option to skip the peer certificate validation.
Default
All
Command Mode
EXEC
Usage Information
Use the show image status command to view the installation progress.
Example
OS10# image install ftp://10.206.28.174:/PKGS_OS10-Enterprise-10.4.0E.55-installer-x86_64.bin
Example (HTTPS)
OS10#image install https://100.104.93.171/os10image.bin
OS10#image install https://100.104.93.171/upgrade/https_test insecure
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\