Dell SmartFabric OS10 User Guide Release 10.5.3

1. Enter ROUTER-BGP mode with an AS number in CONFIGURATION mode.

   router bgp as-number

2. Create a nondefault VRF instance in ROUTER-BGP mode. You can skip this step to enable redistribution of iBGP routes in the default VRF.

   vrf vrf-name

3. Enter IPv4 or IPV6 address-family configuration mode from ROUTER-BGP mode.

   address-family ipv4 unicast

   address-family ipv6 unicast

4. Enable redistribution of internal BGP routes.

   bgp redistribute-internal

5. Enter ROUTER-OSPF mode in a default or nondefault VRF instance.

   router ospf instance-number [vrf vrf-name]

6. Configure redistribution the BGP routes in OSPF in ROUTER-OSPF mode.

   redistribute bgp as-number

Example: Configure redistribution of IPv4 iBGP routes in a nondefault VRF to OSPF

OS10# configure terminal
OS10(config)# router bgp 100
OS10(config-router-bgp-100)# vrf dell
OS10(config-router-bgp-100-vrf)# address-family ipv4 unicast
OS10(configure-router-bgpv4-vrf-af)# bgp redistribute-internal
OS10(config)# router ospf 20 vrf dell
OS10(config-router-ospf-20)# redistribute bgp 100